RJ45 To IDC DIN Rail Coupling
IE-TO-RJ45-FJ-A
Industrial Ethernet Connector
| Connection 1 | RJ45 |
| Connection 2 | IDC |
| Configuration | Switchable voltage connection from module/coupling to mounting rail |
| Wiring | EIA/TIA T568 A |
| Colour | Light Grey |
Shock resistance according to IEC 60512-6-3 | 250 ms-2 |
Vibration resistance according to IEC 60512-6-4 | 50 ms-2 sinusoidal (9-500 Hz) |
| Humidity | 0-93 % relative humidity |
| Housing main material | PA UL 94 V0, PA 66 UL V0 E63957 |
| Insulation cross-section, max. | 1.6 mm |
| Category | Cat.6A / Class EA (ISO/IEC 11801 2010) |
| Contact material | Spring steel, Ni 1.2 µm |
| Contact surface | Au ≥ 0.8 µm |
| Connection diameter, solid | 0.4-0.64 mm |
| Conductor connection cross-section, solid (AWG) | AWG 24-AWG 22 |
| Connection diameter, flexible | 0.48-0.76 mm |
| Conductor connection cross-section, flexible (AWG) | AWG 26-AWG 22 |
| Sheath diameter, min. | 5.5 mm |
| Sheath diameter, max. | 10 mm |
| Type of mounting | TS 35 |
| Shielding | Yes |
| Protection degree | IP20 |
| Plugging cycles | 750 (RJ45) |
| Ability to reconnect | ≥ 10 cycles for AWG 23-26, ≥ 4 cycles for AWG 22 |
Images are indicative only. Contents and colours may vary.